Produse pentru bactoferm lhp uscat (21)

iglidur® C500 Up to +250 °C, wear-resistant. iglidur® C500 can be used up to 250 °C, extremely media-resistant – including in cleaning processes with hydrogen peroxide – wear resistant, with low friction values. Also suited for a wide range of custom geometries or piston rings. High resistance to media and temperature Long-term service temperature +250°C Good coefficients of friction and wear Lubricant- and mainteance-free

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Le Liquide Désinfectant Surface permet de désinfecter des supports, revêtements, surfaces non lessivables ou ne pouvant être désinfectées par immersion, trempage, etc... Ce produit présente un large spectre d’activité de désinfection et limite les risques de propagation microbienne entre les surfaces utilisées en commun, sans altération des plastiques, métaux ou matériaux de mobilier usuels. Conditionnement:Bidon 5L

filtration d'odeurs de COV par charbon actif

Die neueste Generation multifunktionaler YSTRAL PiloTec-Prozessanlagen bietet Ihnen die Möglichkeit, Produktionsverfahren auch im Labormaßstab einzusetzen. Auf Grundlage der Conti-TDS-Technologie können in einem Arbeitsgang Pulver staubfrei eingesaugt, benetzt und unter Vakuum dispergiert werden. Ein einfacher Wechsel der Werkzeuge ermöglicht den Betrieb im innovativen Multi-Z- oder Z-Inline-Verfahren mit hochpräzisen mehrstufigen Scherkranz-Systemen. Etablierte Verfahren und ein von der Chargengröße unabhängiger spezifischer Energieeintrag garantieren Ihnen hervorragende und gleichbleibende Ergebnisse. Diese können problemlos in den Produktionsmaßstab übertragen werden – ein sicheres Scale-up zum ystral Anlagenbau. Der modulare Aufbau ermöglicht die Erweiterung zur PiloTec-Plant-Prozessanlage mit ystral Mischtechnik, Systemen zum Handling von Pulvern und Flüssigkeiten, Messtechnik und Sensorik, Hubstativen und weiteren modularen Komponenten. Leistung:4 kW Drehzahl:Bis 12.000 min-1 Frequenzumrichter Schergeschwindigkeit:bis zu 60 m/s Spannung:230 / 400 V, 50 Hz Dispergierkammer:Edelstahl 1.4404 (AISI 316 L) Einsaugleistung Pulver:bis zu 15 kg/min Chargengröße:flexibel ab 5 l bis zu 200 l

Das bewährte HIGHPOWER Harz mit der langen Reichweite für konventionelle Heizungsanlagen wird ergänzt durch das neue NEXION Harz mit einem definierten Überschuss an Anionenharz zur pH Regulierung.

Dies ist ein Sonderprodukt, welches auf Nachfrage individuell für Sie produziert werden kann. Mindermengen können gelten. Sprechen Sie uns einfach an.

Die COMPACT swift Trockner sind vielseitig einsetzbar und flexibel. Sie bieten eine integrierte Lösung, die das Trocknen und Fördern des Rohmaterials in einer Einheit verbindet. Die Trockner sind in zwei Ausführungen erhältlich und jeweils mit einem Trocknungstrichter der Größe 80 oder 150 Liter und bis zu zwei Fördergeräten mit einem Fassungsvermögen von jeweils 4 Litern ausgestattet. Der COMPACT swift A Trockner ist mit erweiterten Funktionen wie Taupunktsteuerung und Trockenluft-Förder-Funktion mit Leersaugung ausgestattet. Dank eines modernen 7-Zoll-Farbdisplays mit Touchscreen in 16 Sprachen können alle Förder- und Trocknungsfunktionen benutzerfreundlich gesteuert und überwacht werden. Technologie:Adsorptionstrockner Verfahren:Spritzguss, Extrusion Materialdurchsatz:mittel bis groß Taupunkt:-40 ~ -70 °C

La Crème Neutre est destinée aux massages utilisés une manipulation régulière, plus ou moins longue. Hydrosoluble, hypoallergénique, ne tachant pas et naturellement hydratante, elle apporte glisse et confort, sans risque d’échauffement dû à une manipulation prolongée. Application: Appliquer directement sur la zone à traiter par petites quantités (30 ml). Masser jusqu’à pénétration complète du produit. Formule: Émulsions L / H, huile d’amande douce, vitamine B5, chèvrefeuille. Poids:0,3 kg Contenant:250ml, 500ml, 1000ml, 5000ml

Die Serie HP-E3000GL besitzt eine Zulassung vom Germanischen Lloyd für den Bau von Booten und Windkraftanlagen und ist individuell mit verschiedenen Härtern auslieferbar.

cartridge dust collector ATEX with Multijet cleaning system, soundproof box, dust collection bin The cartridge dust collector MJT is a filtration system to purify the air used to dry the solid particles in suspension. It’s suitable for the extraction of potentially explosive dusts ( ATEX ) from painting operations. The input of the dust collector has been studied to have an optimum distribution of the fluid. The recovered material recovered discharged in a special bin installed under the hopper. The cartridge filter MJT is especially suitable for the intake of dust arising from powder coating of polyester, epoxy which may potentially cause explosive atmospheres ( ATEX ) . Benefits The cartridges are run by reading the pressure drop of the filter elements for a more efficient cleaning with a lower compressed air consumption and longer life of filter elements. Maintenance can be easily carried out thanks to special cartridge access door. The cartridge dust collector MJT has a...

Evaporator System type EVA-EC1-L complete for 24 samples, consists of Evaporator unit with motordriven lift, Metalblock-Thermostat Type EC-1V-130, Heating block Type HBV-EC1-24-16 with 24 holes for test tubes OD 16 mm, 24 stainless steel cannulas (1.4571) ID 0,35 mm, 2 m PUR connection hose, A large variety of different heating blocks is available to meet your needs best.

Das von Biosepar völlig neu entwickeltes formalinfreies Fixiermedium hat viele Vorteile gegenüber den formalinhaltigen früheren konventionellen Fixiermittel. Diese sind u.a.: Allgemein bessere Färbeeigenschaften von Gewebe und Zellen, die die diagnostische Qualität und Sicheheit enorm erhöhen, keine Gewebeschrumpfungen durch Denaturierungen, keine störende färberische Artefacte, intakte immunologische Sensitivität von Antikörper und Antigen, Vermeindung der irreversiblen Vernetzung von DNS und RNS und fehlende Giftigkeit, wodurch keine Entsorgungsprobleme bestehen. Das FixSepar® ECO PLUS Histology (FEPH®) bietet für alle Human- und Veterinärmediziner, Biologen, Immunologen und Molekularbiologen zukünftig bessere Ergebnisse und günstigere, ungefährliche Arbeitsbedingungen.

Unopex B 230 Pilot Scale Spray Dryer has been designed for small scale productions, for scientific test works in the universities and R&D departments and for scale up studies. Unopex B 230 Pilot Scale Spray Dryer is suitable for production of powders from solutions, suspensions or emulsions. The powder characteristics can be controlled and powder properties maintained constant throughout a continuous operation.

Protech Balcony Solution based on special silane and siloxane resins in solvent, highly penetrating, transparent (colourless), for quickly, effectively and economically waterproofing balconies, tiled terraces, concrete roofings, external stairs, etc., without removing or intervening on the existing flooring. It does not change the appearance of the support on which it is applied and it does not alter the original slipperiness or its water vapour breathability. It is quick to apply and does not require skilled labour or professional equipment. The flooring treated will be usable after only 2 hours of laying. Protech Balcony is a product that is easy and quick to apply: simply spread it out with a scrubbing brush on clean and dry surfaces to solve the problem of infiltration. The active ingredient, effectively conveyed in a solvent, it penetrates fillings, substrate cracks and porosity rapidly and in-depth. Upon contact with air, it performs a polymerisation reaction that seals and waterproofs, perfectly and in depth, all discontinuities where it has managed to penetrate. After the reaction, the specific polymerised siloxane molecule is stable over time and does not labilise. Thus, the effective life of the product being applied on surfaces which are not subject to dynamic movements and seismic activity, is normally in excess of 10 years. If necessary, if new discontinuities, cracklings, cracks, fissures etc. appear after the first application of Protech Balcony, these may conveniently be resolved with a second application of the product. Given its intrinsically non-pellicular nature, the product will not be subject to fissures, tears, cracks, separations, deterioration and will not yellow over time, under the effects of UV rays (as occurs naturally for epoxy and/or polyurethane treatments). The surfacings treated with Protech Balcony will be resistant to mildew, moss, lichens and other biodeteriogenic bodies. Please note that the effectiveness in terms of water repellence, and watertightness of Protech Balcony has been certified with suitable tests conducted at the laboratories of the department of structural engineering of POLITECNICO DI MILANO (the Polytechnic of Milan). Quick waterproofing, of balconies, terraces, stairs, decks, tiled surfaces, concrete structures, and natural stones, without demolishing the existing flooring. Also for use on vertical surfaces particularly exposed to the inclemency of the weather and atmospheric agents (tiled, plastered, exposed brickwork, etc.). The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The vanishing points between tiles, if present, should be appropriately treated with suitable acid or alkali cleaners. In this respect it is recommended that the specific acid detergent Deterg-A, diluted with water at a ratio of 1:4. Rinse the treated surfaces with running water. Labile and non-adhering vanishing points, possibly removed, are required to be restored with high adhesion and deformability cement surfacers. In this respect it is advisable to use of the specific two-component waterproof and deformable filler Stucco Balcony. Wait for the necessary time (1-2 days) for drying the filling before applying Protech Balcony. Any expansion joints present, including those relating to the junction line of the tiled flooring and the perimeter kerb (typically made of granite or natural stone), will have to be sealed with high elasticity polymeric materials. In this respect, it is advisable to seal them with Protech Flex, assisted by laying Filtene Fondogiunto and the appropriate polyurethane primer Protech Flex Primer. Pour small amounts of product at a time and spread it evenly over the entire surface with a scrubbing brush or a "water squeegee", until complete impregnation of the support to be waterproofed. Set Protech Balcony with all due care in less accessible and more uncomfortable areas, by using a brush with long bristles or a sponge (edges, skirting boards, corners, sills, wells, chimney flues, discharges, etc.). Allow the product to penetrate for at least 60 minutes. Within maximum 120 minutes of application, remove the excess product on all surfaces treated with a cloth soaked in the diluent Nitro. The product consumption is on average about 0,125 l/m² of surface to be waterproofed; varying according to the absorption of the support and the size of any vanishing points. Normally it is considered that with 1 litre of Protech Balcony you can treat from 7 to 15 m² of surfaces. Packaging: 2-liter can UM: €/l

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

The COMPACT swift dryers are designed with flexibility in mind. They offer an integrated solution, combining the drying and conveying of the raw material in one unit. The dryers are available in two versions and are each equipped with one drying bin of the size 80 or 150 litres and up to 2 hopper loaders with a capacity of 4 litres each. The COMPACT swift A dryer is provided with advanced functions such as dew point control and dry air conveying function with line purging. Thanks to a modern 7-inch colour display with touch screen, all conveying and drying functions can be shown and monitored in a user-friendly way. 16 user languages can easily be selected. Technology:adsorption dryers, granulate drying Process:injection molding, extrusion Material throughput:medium to large Dew point:-40 ~ -70°C

Baghouse dust collector with dirty air inlet in the pre-chamber,bin collection, rockwool insulation and buffers with aluminium sheets The Pulco Air HTB baghouse filter is a dry filtration system used to treat a wide range of pollutants. Its installation allows treatment of a vast range of pollutants and guarantees the quality of the air in the production environment and protection for workers. Filter inlet is composed of a pre-chamber, which recovers the bigger powder particles. Benefits The baghouse filter is composed and configured on the base of type of use and the specific requirements of the client. The Pulse Jet Cleaning System is managed by a PLC with a sensor, that reads the pressure drop of the filtering elements, encouraging minor compressed air consumption and greater duration of the bags. The pre-chamber recovers the biggest powder particles, safeguarding the baghouses from excess loads of pollutants and guaranteeing longer duration. HTB baghouse filter is composed...

No âmbito da transformação de plásticos técnicos, a secagem eficiente e perfeita do material é essencial para obter uma excelente qualidade do produto. Com os secadores de ar comprimido totalmente isolados LUXOR CA S, a motan oferece uma solução económica para a secagem eficiente e rentável de todos os granulados de plástico para débitos de material até 25 kg/h. Os secadores podem ser instalados diretamente em cima da máquina de processamento ou numa armação móvel. Tecnologia:adsorção, secagem, Processo:moldagem por injeção Rendimento do material:médio Cor:RAL

ELKALUB GLG 886/N00 ist ein Fließfett für die Getriebeschmierung. Das Polyglykol-Fett weist sehr gute Reibbeiwerte auf und eignet sich daher besonders für Getriebe mit hohen Gleitanteilen (Schnecken- und Hypoidgetriebe, Spindelhubgetriebe) ELKALUB GLG 886/N00 hat die NSF H1-Zertifizierung und kann daher in lebensmittelverarbeitenden Bereichen verwendet werden. Ein typisches Einsatzgebiet sind Kleingetriebe an Abfüllanlagen und Verpackungsmaschinen. Bitte beachten: ELKALUB GLG 886/N00 ist nicht mit konventionellen Fetten auf Mineralölbasis mischbar. Vor einer Anwendung ist die Verträglichkeit mit Kunststoffen, Elastomeren (außer EPDM) und Beschichtungen (z.B. Innenanstriche) zu prüfen. Dies ist ein Sonderprodukt, welches auf Nachfrage individuell für Sie produziert werden kann. Mindermengen können gelten. Sprechen Sie uns einfach an.

ATEX baghouse dust collector with dirty air inlet in the hopper, rotary valve, explosion-proof panels. The Pulco Air ATEX NSVA baghouse filter is a dry filtration system used if there are potentially explosive powders to purify the air of suspended solid particles. Its installation allows treatment of a vast range of pollutants. The dirty air inlet takes place directly in the hopper and the recovered material is unloaded in the rotary valve. The explosion-proof panels, necessary in an explosion to release excess pressure, are installed in a specific raised section. Benefits The baghouse filter is composed and configured on the base of type of use and on the specific requirements of the client. The Pulse Jet Cleaning System is managed by a PLC with a sensor that reads the pressure drop of the filtering elements encouraging minor compressed air consumption and greater duration of the bags. The hopper is equipped with a rotary valve to continuously release the powder and...